Skip to main content
Politecnico di Milano

Introduction to nuclear

Nuclear processes and measurement for radiation detection.

The Safeguards Training and Education project

This MOOC is part of the Safeguards Training and Education project.
The SaTE project is a EC DG INTPA (former DG DEVCO) funded project under contract no. INSC/2018/401-261 and implemented by ENEN.

Logo UE

The European Commission support for the production of this publication does not constitute an endorsement of the contents which reflects the views only of the authors, and the Commission cannot be held responsible for any use which may be made of the information contained therein.

If you are a POLIMI student you have to log in using your Person Code. This is the only way to prove your participation in this course for official recognition.

Course description

The study of static and dynamic properties of nuclei constitutes a first essential step in the comprehension and exploitation of Nuclear Science. Starting from the experimental evidence of radioactivity, the course will explore:

  • the physical and the random nature of radioactive decay and nuclear reactions;
  • the experimental methods and detector technologies to measure radiations produced by nuclear processes.

To better explore the topic, we will enter in POLIMI Labs to look at the working principles of the detectors employed in gamma-ray spectrometry. Also, we will see how nuclear reactions can be exploited to detect the presence of neutrons and to measure their energy.
Finally, we will see the main procedures used in radiochemistry to perform destructive analysis, useful When nuclei are hard to measure.

Total workload of the course: 25 hours

This MOOC is provided by Politecnico di Milano.

Information about fees and access to materials

You can access the course absolutely free of charge and completely online.

Course materials will remain available to all enrolled users after the end of the current edition, so they can return to content later. The current course edition will be followed by a new one just after its end.

Learning schedule

The course is structured in 4 main weeks.

  • Week 1 – Intro to nuclear processes
  • Week 2 – Principles of radiation detection
  • Week 3 – Hard-to-Measure radionuclides
  • Week 4 – Welcome to nuclear Labs

The weeks have different lessons within them, consisting of videos, quizzes, completed by additional materials and resources. These last allow you to reach a level of detail greater in some topics of your interest.

In particular, Week 1 will specifically address radioactivity in the time domain, radioactive decays and related properties, nuclear reactions and cross section.

In Week 2 will focus on both Gamma-matter interaction and detectors, and Neutron sources and detectors.

Week 3 will focus on Radiological characterization which is of paramount importance for nuclear safeguards and specifically on how to determine Hard-to-Measure radionuclides.

Week 4 opens the door to some Laboratories of Politecnico di Milano which deals with nuclear measurements, gamma spectrometry, Radiochemistry and Radiation Chemistry.

Intended Learning Outcomes

By actively participating in this MOOC, you will achieve different intended learning outcomes (ILOs).

Week 1

  1. List and describe the main characteristics of the radioactive decay
    ESCO: Nuclear physics
  2. Recall the different radioactive decay modes and the related properties
    ESCO: Nuclear physics
  3. Describe the main features of nuclear reactions and how to measure the so-called reaction cross-section.
    ESCO: Nuclear physics

Week 2

  1. Describe scintillation and semiconductor detectors and how they are used to detect gamma rays
    ESCO: Nuclear physics
  2. Describe how neutrons are produced, how they can be classified and how they can be detected
    ESCO: Nuclear physics

Week 3

  1. Describe why some radionuclides cannot be easily detected and measured and how to deal with them.
    ESCO: Radiochemistry

Week 4

  1. Describe some methods and techniques for measuring various types of radiation fields, used in the Politecnico di Milano Nuclear Measurements Lab
    ESCO: Monitor radiation level
  2. Analyse the spectra of two radioisotopes of plutonium using different devices, a portable sodium iodide and a GMX HPGe detector
    ESCO: Monitor radiation level
  3. Understand advantages and disadvantages in determining uranium concentration in water by alpha spectrometry and Inductively Coupled Plasma mass spectrometry
    ESCO: Monitor radiation level ESCO: Radiochemistry


As prerequisite it is recommended to have some basic knowledge of chemistry and physics.


Over and above consulting the content, in the form of videos and other web-based resources, you will have the opportunity to discuss course topics and to share ideas with your peers in the Forum of this MOOC.

Throughout each module, you will also find some “Self assessment quizzes”. Self assessment quizzes are not graded: they are meant to support the consolidation of the knowledge acquired following the previous video and to help you understand which are the main takeaway.


The final grade for the course is based on the results from your responses to the quiz you’ll find in week 5 (which is devoted to the Final Quiz).
You will successfully complete the course if you reach 60% (or more) of the total score of the Final Quiz by the end of the edition.

Certificate of Accomplishment

The Certificate of Accomplishment will be released to anyone who successfully completed the course by answering correctly to at least 60% of the questions of the Final Quiz (week 5). You will be able to download the Certificate of Accomplishment directly on the website.

Once you have successfully passed the course, you can request the Certificate of Accomplishment without waiting for the end of the edition.

The Certificate of Accomplishment does not confer any academic credit, grade or degree.

European Qualifications Framework Level

EQF Level 5

Thematic area (ISCED-F classification)

This MOOC belongs to the following thematic areas.

  • 053 Physical sciences
    • 0531 Chemistry
    • 0533 Physics

Discussion forum

The forum of this MOOC is freely accessible and participation is not guided; you can use it to compare yourself with other participants, or to discuss course contents with them.

Contact details

If you have any enquiries about the course or if you need technical assistance please contact For further information, see FAQ page.

Course Faculty

Stefano Giulini Castiglioni Agosteo

Stefano Giulini Castiglioni Agosteo, Politecnico di Milano

Stefano Giulini Castiglioni Agosteo is a full professor in the field of Nuclear Measurements and Instrumentation and a member of the PhD Council in Energy and Nuclear Science and Technology at the Politecnico di Milano. He has been collaborating with the TERA program for constructing a hadrontherapy centre in Italy and with the radiation protection group of CERN. His research interests are also focused on radiation dosimetry, microdosimetry and neutron spectrometry. He is responsible for several research programs of the INFN in the field of BNCT, neutron spectrometry with silicon detectors, silicon microdosimetry and microdosimetry at the nanometric level.

Davide Bortot

Davide Bortot, Politecnico di Milano

Davide Bortot graduated in Nuclear Engineering and completed a PhD in Energy and Nuclear Science and Technology. He is a Researcher in the field of Nuclear Measurements and Instrumentation at the Energy Department of Politecnico di Milano. His research interests revolve around radiation dosimetry, gas and solid-state microdosimetry of hadrontherapy beams and neutron and gamma spectrometry. He is involved in the laboratory teaching of Radiation Detection and Measurement, Medical Applications of Radiation Fields and Electronics courses of Politecnico di Milano.

Francesco Casamichiela

Francesco Casamichiela, Politecnico di Milano

Francesco Casamichiela is a PhD student in Energy and Nuclear Science and Technology at Politecnico di Milano. He graduated in Nuclear Engineering with a thesis on the study of a spectrometer for laser-driven ion beams. His research is focused on X-ray radiography and tomography applied to non-destructive testing of objects of various dimensions and materials. He is involved in the laboratory teaching of the Laboratory of Nuclear Physics course at Politecnico di Milano.

Riccardo Chebac

Riccardo Chebac, Politecnico di Milano

Riccardo Chebac graduated in Nuclear Engineering and he is a PhD student at Politecnico di Milano. He’s working on graphite-moderated reactor dismantling optimization within the Inno4Graph project. In parallel he is an intern at the Nuclear Energy Agency (NEA) in the team of Radioactive Waste Management and Decommissioning (RWMD) division.

Elena Macerata

Elena Macerata, Politecnico di Milano

Elena Macerata graduated in Nuclear Engineering and completed a PhD in Radiation Science and Technology on the study of hydrometallurgical processes for the partitioning of minor actinides from spent nuclear fuel. Today, she is a senior researcher in the Radiochemistry and Radiation Chemistry Laboratory of the Department of Energy at POLIMI. Her research work is mainly focused on the development of hydrometallurgical processes for the advanced reprocessing of spent fuel, the study of radiolytic degradation phenomena in different systems and the study of chemical compatibility issues for Generation IV reactors.

Mario Mariani

Mario Mariani, Politecnico di Milano

Mario Mariani graduated in chemistry at Università degli Studi in Pavia. In 1989, he earned his doctorate in Chemical Science. Today, he is full professor at POLIMI and Head of Radiochemistry and Radiation Chemistry Laboratory at the Department of Energy. He is Lecturer of MSc course Applied Radiochemistry and courses for PhD in Energy and Nuclear Science and Technology. His research activities are in the fields of nuclear and radiochemistry, radiation chemistry and nuclear decommissioning.

Davide Mazzucconi

Davide Mazzucconi, Politecnico di Milano

Davide Mazzucconi is a Research Fellow in the field of Nuclear Measurements and Instrumentation at the Energy Department of Politecnico di Milano. He is a Nuclear Engineer and completed a PhD in Energy and Nuclear Science and Technology. His research activity is related to numerical and experimental radiation dosimetry, radiation therapy and hadrontherapy, gas and solid-state micro-nanodosimetry.

Eros Mossini

Eros Mossini, Politecnico di Milano

Eros Mossini holds Master’s Degree in Nuclear Engineering and Ph.D. Degree in Energy and Nuclear Science and Technology. He is Assistant Professor at Department of Energy of Politecnico di Milano in the field of Nuclear Measurements and Instrumentation. His research efforts are mainly focused on radiochemistry and radiation chemistry cutting-edge topics, such as hydromethallurgical processes for actinide recovery from spent nuclear fuel; radiological characterization of environmental, industrial and nuclear samples; nuclear decommissioning and waste management. He is involved in laboratory teaching of “Radiation Detection and Measurement” and “Applied Radiochemistry” courses of Politecnico di Milano.

Andrea Pola

Andrea Pola, Politecnico di Milano

Andrea Pola graduated in Nuclear Engineering and completed a PhD in Radiation Science and Technology. He is associate professor of Nuclear Measurements and Instrumentation and lecturer of the courses “Radioactivity” and “Laboratory of Physics of the Nucleus” at Politecnico di Milano. His research interests mainly concern neutron spectrometry and dosimetry, neutron metrology, dosimetry and microdosimetry of hadrontherapy beams. He is the head of the Neutron Metrology Facility of the Department of Energy of Politecnico di Milano.

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

  1. Classes Start

    Oct 04, 2021
  2. Classes End

    Sep 25, 2022
  3. Length

    4 weeks
  4. Estimated Effort

    6 hours/week
  5. Language

  6. Course Number

  7. MOOCs For Professionals